شرکت حفاری مپنا نور کیش

معرفی شرکت

شرکت حفاری مپنا نور کیش (MDCO) به‌عنوان یکی از شرکت‌های تابعهٔ گروه مپنا، در حوزهٔ تأمین دکل‌های حفاری خشکی و دریایی، تأمین خدمات جانبی متنوع حفاری و همچنین عملیات حفاری، تعمیر و تکمیل چاه‌های نفتی و گازی در سال ۱۳۸۸ تأسیس گردید. اجرای کامل عملیات حفاری توسط دستگاه‌های حفاری خشکی و دریا، مهندسی و تأمین کالاهای مورد نیاز حفر و تکمیل چاه و برنامه‌ریزی جهت انجام پروژه‌های EPD بخشی از مأموریت‌های این شرکت است.

شرکت حفاری مپنا نور کیش در حوزهٔ عملیات حفاری و تأمین خدمات فنی جانبی، از جمله مغزه‌گیری، سیمان‌کاری، اسیدکاری، راندن لوله‌های جداری و رشتهٔ تکمیلی، نمودارگیری از گل، آزمایش چاه، لولهٔ مغزی سیار، پمپاژ نیتروژن و مدیریت پسماند فعالیت دارد.

تاریخچه فعالیت شرکت

۱۳۸۸تأسیس شرکت با نام توسعه انرژی خاورمیانه نور کیش
۱۳۹۱آغاز فعالیت دکل نور ۱ (۴۰۱) در پروژه‌های شرکت ملی مناطق نفت‌خیز جنوب
۱۳۹۲تغییر نام به حفاری مپنا نور کیش؛ آماده‌سازی MAP DRILLER 1 و آغاز فعالیت نور ۲
۱۳۹۳تجهیز شرکت به خدمات جانبی حفاری
۱۳۹۴راه‌اندازی سرویس‌های جانبی و شروع عملیات MAP DRILLER 1 در میادین فلات قاره
۱۳۹۵ تا ۱۳۹۸ادامهٔ فعالیت دکل‌های خشکی و دریایی و ارائهٔ خدمات جانبی
۱۳۹۹آغاز عملیات خشکی در میدان دانان و فعالیت دریایی در پارس جنوبی
۱۴۰۱اتمام حفاری و تکمیل ۱۱ حلقه چاه دانان در مردادماه؛ آغاز پروژهٔ شوریجه D در مهرماه
۱۴۰۲پیشرفت حفاری و تکمیل دومین چاه تزریقی و تولیدی مخزن شوریجه D

مأموریت، چشم‌انداز و ارزش‌ها

مأموریت

ما به دنبال نقش‌آفرینی در توسعهٔ انرژی در بخش بالادستی صنعت نفت و گاز از طریق ارائهٔ کلیهٔ خدمات فنی، مهندسی، مشاوره‌ای و اجرایی در حوزهٔ حفاری مبتنی بر خلق ارزش و کسب حداکثر منافع برای ذینفعان با رعایت الزامات زیست‌محیطی و ایمنی در جهت توسعهٔ پایدار هستیم.

چشم‌انداز

تبدیل‌شدن به انتخاب اول برای کارکنان و مشتریان در حوزهٔ بالادست صنعت نفت و گاز

ارزش‌ها

تمرکز بر مشتری
نوآوری
تعالی سازمانی و نتیجه‌گرایی
ایمنی و دوستی با محیط زیست
مسئولیت‌پذیری، کار تیمی، پاسخگویی و اشتراک دانش
اخلاق کسب‌وکار

خلاصهٔ تجهیزات

۲ دستگاه دکل خشکی نور ۱ و نور ۲
۱ دستگاه دکل دریایی MAP DRILLER 1
۱۱ سرویس خدمات جانبی حفاری

دکل‌های حفاری خشکی

نور ۱ و نور ۲

دو دستگاه حفاری خشکی شرکت برای حفاری، تعمیر و تکمیل چاه‌های نفت و گاز به‌کار گرفته شده‌اند. مشخصات مشترک معرفی‌شده برای این دو دستگاه در جدول زیر آمده است.

توان دراورکس	۲۰۰۰ HP
ارتفاع برج	۴۵ متر
حداکثر توانایی حفاری معرفی‌شده	۷٬۰۰۰ متر (۲۲٬۹۶۶ فوت)
ارتفاع کف حفاری	۱۰٫۵ متر
ظرفیت چیدمان لوله	۷٬۰۰۰ m of 5-inch drill pipe
بار ایستای قلاب (مقادیر درج‌شده)	1,100,000 lb / 4500 kN
میز دوار	37.5 in
تاپ‌درایو	VARCO TDS-11SA — 500 ton — 800 HP
مولدها	4 × Caterpillar 3512B — 1200 kW — 1500 rpm

سکوی حفاری دریایی MAP DRILLER 1

نام دستگاه	MAP DRILLER 1 (MD1)
نوع / طراحی	Jack-up / Self-elevating — Friede & Goldman Super M2
سازنده	Yantai CIMC Raffles Offshore Ltd.
سال آغاز ساخت / تحویل	۲۰۰۹ / ۲۰۱۱
عمق طراحی آب	۹۱٫۴۴ متر (۳۰۰ فوت)
حداقل عمق آب معمول	۹٫۱۴۴ متر (۳۰ فوت)
عمق نامی حفاری	۹٬۱۴۴ متر (۳۰٬۰۰۰ فوت)
پایه‌ها	3 × 409.6 ft (124.83 m) — triangular, independent leg
ظرفیت اقامت	۱۱۰ نفر
بار متغیر حفاری	6784 kips (3080 t)
حداکثر بار کنسول	1700 kips at 50/0; 650 kips at 50/15
سیستم جکینگ	F&G rack chock — VFD-440 — 54 units
طول کلی / عرض کلی	81.253 m / 61 m
طول / عرض / عمق بدنه	59.745 m / 55.78 m / 7.62 m
برج	TSC — 170 ft — base 35 × 40 ft
بار ایستای قلاب برج	1,500,000 lb
دراورکس	Oilfield Electric Marine 2330 — 2 × 1150 HP; continuous 2300 HP; intermittent 3000 HP
میز دوار	TSC 495E — 49½ in — 750 short tons
تاپ‌درایو	Canrig 1275AC — 750 ton
بلوک متحرک	Canrig AY14522 — 1,500,000 lb
سیم حفاری	1⅝ in — IWRC — 6×26WS EEIPS — original length 10,000 ft
ارتفاع کف حفاری از عرشه اصلی	16.575 m
گل فعال / ذخیره	2305 bbl / 3255 bbl
ذخیره آب حفاری	8613 bbl
جرثقیل‌های اصلی	2 × MEP Pellegrini GN 50/8 DH
هلی‌دک	22.20 × 22.20 m — Sikorsky S61N or equivalent — 9.3 t
آب‌شیرین‌کن	2 × Aquachem HSRO-30 — reverse osmosis

سکوی حفاری دریایی MAP DRILLER 1 شرکت حفاری مپنا در دریا

نمای هوایی شبانه سکوی حفاری دریایی MAP DRILLER 1 شرکت حفاری مپنا با هلی‌دک

پروژه‌ها و سوابق عملیات

دانان	حفاری و تکمیل ۱۱ حلقه چاه؛ EPDS؛ اتمام مرداد ۱۴۰۱
شوریجه D خانگیران	پروژهٔ حفاری و تکمیل ۲۸ حلقه چاه در طرح BOT؛ آغاز مهر ۱۴۰۱
اهواز، مارون، آزادگان و منصوری	۲۱ حلقه چاه
فاز ۱۱ پارس جنوبی	حفاری ۴ حلقه چاه
فاز ۱۲ پارس جنوبی	عملیات دریایی
نصرت	تعمیر ۷ حلقه چاه
فروزان	تعمیر ۲ حلقه چاه
ابوذر	تعمیر ۴ حلقه چاه
درود	تعمیر ۱ حلقه چاه
سروش	تعمیر ۹ حلقه چاه و حفاری ۲ حلقه چاه

خدمات فنی و جانبی حفاری

مغزه‌گیری
سیمان‌کاری و مهندسی سیمان
اسیدکاری
راندن لولهٔ جداری، آستری و رشتهٔ تکمیلی با تجهیزات پیشرفته و جم سیستم
نمودارگیری از گل حفاری
آزمایش ساق مته و خدمات توپک‌گذاری
تست سرچاهی و آزمایش سطحی چاه
مانده‌یابی
لولهٔ مغزی سیار
پمپاژ نیتروژن و فرازآوری
مدیریت پسماند حفاری

مشخصات تفصیلی MD1

UNIT SPECIFICATIONS

Rig Type:	Jack Up/Self-Elevating
Unit/Design/Shape:	Friede & Goldman, Super M2
Unit Flag:	PANAMA
Unit Classification:	A1 Self Elevating Drilling Unit (2006) IMO Certification: Yes, IMO Resolution A649(16)
Which Code Version:	Code for the Construction and Equipment of Mobile Offshore Drilling Units (1989)
Year of Keel-Laying:	2009
Year of Delivery:	2011
Construction Yard:	Yantai CIMC Raffles Offshore Ltd.

MAIN DIMENSIONS/TECHNICALDESCRIPTION

Light Ship:	20,061kips(9,100 metric tons)
Displacement at Loadline:	25,794 Kips (11,700tons)
Overall length of unit (including helideck):	266.6’ (81.253meters)
Overall width of unit (including anchor racks):	200’ (61meters)
Hull Length:	196’ (59.745meters)
Hull Width:	183’ (55.78meters)
Hull Depth:	25' (7.62meters)
Number of Legs/Length:	3 x 409.6ft. (124.83meters)
Load Line Draft:	17ft. (5.2meters)
Leg length available below hull:	359ft.(110meters)
Type of Leg:	Triangular
Leg spacing (centre to centre):
Transverse:	120ft. (36.6meters)
Longitudinal:	115ft. (35.055meters)
Independent leg or matt:	Independent leg
Spud can diameter/bearing area:	12.09meters/ 108.62 square meter each
Spud can height:	15ft. (4.572meters)
Spud can jetting system:	1 system bottom & 1 system top - 2 total per can
Bottom jets:	12 Nozzles, - 3,000 psi pressure
Top jets:	12 Nozzles, -3,000 psi pressure
Water Supply from Mud Pumps:	Yes/No Yes
Pressure:	3,000psi
Width:	N/A
Depth:	N/A
Cantilever or slot:	Cantilever
Skid-off:	No
Cantilever Envelope:	0 Ft. – 50 Ft. Aft Transom
Drawing Envelope:	15 Ft. Centre Line either side
Reach AFT, from/to:	0ft. / 50ft.
Transverse, Port/Stbd:	15ft. / 15ft.
Slot dimensions:
Length:	N/A
Width:	N/A
Mat slot dimensions:
Length:	N/A
Width:	N/A
Max. cantilever load:	1,700kips at 50/0
combined (hook + rotary + setback):	650kips at 50/15
Max. rotary load:	1,500kips
Max. setback load:	750kips
Accommodation for maximum No. personnel:	110 persons
See K.2.1.):

STORAGE CAPACITIES

Diesel Fuel:	644 M/T
Lube Oil:	4.73M/T
Drill Water:	8,613bbls
Potable Water:	372 M/T
Mud Processing Tank (see F.2):	198bbls
Active Liquid Mud (see F.2):	2,305bbls
Independent Oil Base Mud storage:	3,255bbls inactive/reserve pits
Independent Base Oil storage:	900bbl
Independent Brine storage:	900bbl
Heavy Brine accepted (e.g. Bromide):	Not Accepted
Bulk Bentonite/Barite (see F.3):	4,803ft3
Bulk Cement (see F.3):	7,204ft3
Sack storage:	5,000 sacks
Pipe Rack load capacity:
- Cantilever beam pipe rack	272 tonne
- Main Deck pipe rack	622 tonne
Deck load capacity:
Main deck:	2.08 t/m2
Main deck pipe rack:	2.64 t/m2
Cantilever beam deck:	1.32 t/m2
Cantilever beam deck pipe rack:	2.64 t/m2
Machinery deck:	1.32 t/m2
Drill floor:	1.95 t/m2
Set back:	2.25 t/m2
Mud pits:	18ppg
Sack stores:	2.64 t/m2
Quarter's top deck:	0.73 t/m2
Helideck:	0.21 t/m2
Lifesaving deck:	0.46 t/m2
Center control room top:	0.73 t/m2
Preload capacity:	6,607M/T (14,565kips)
Time to fill and dump preload:	N/A

JACKUP SYSTEMS / Jacking Systems

Make/type:	Friede & Goldman, Ltd. patented and supplied rack chock system, VFD-440 jack- up gear unit
No. of jacks or pinions:	54units
Maximum Normal jacking capacity:	440 kips/units
Maximum preload jacking capacity:	440 kips/units
Maximum static holdingcapacity:	700 kips/units
Maximum preload holdingcapacity:	900 kips/units
Maximum Jacking speed:	1.5ft/min
Rack chocks available:	Yes
Rack chock bearing capacity	8,400 kips/chord
Required for field tow:	Yes

Raw Water Systems

Elevated:
Pump location (water tower or leg):	Hose reel type
Suction distance below hull (max):	30m
Quantity:	3
Make/type:	Sea Technology Ltd /Sea Jet
Capacity:	500m3/h(2,200GPM)/each
@ Pressure:	@ 5bar
Horsepower:	150hp
Afloat:
Salt water service pump:
Quantity:	2
Make/type:	Azcue, Spain/ VM125/26
Capacity:	300m3/h
@ Pressure:	@ 3bar
Horsepower:	48hp
Dedicated preload pump:	Yes
Quantity:	(No.) 1
Make/type:	Bombas Azcue S.A Capacity: (bbl./min) 300 M3
@ pressure:	(Bar) 3
Horsepower:	(hp.) 55

Skidding Systems / Cantilever Skidding Unit

Quantity:	2
Make/model:	TSC/FNG
Static Breakout Capacity:	2,200kips (total)
Dynamic Capacity:	1,800kips (total)
Travel Speed (cylinder speed):	1ft./min (1 pump set working) 2ft./min (2 pump sets working)
Mode of Travel:	Hydraulic Cylinder (double acting)
Direction Of Travel:	2 Way

HPU for Cantilever Skidding Unit

Quantity:	1
Make/model	TSC/FNG
HPU pumps:	2each 0-315 litre/min
HPU design capacity:	0-610 litre/minute

Drill Floor Skidding Unit including Control Console

Quantity:	4
Make:	TSC
Drill floor mass:	1,000 Kips (454T)
Lift Load	227T at each corner
Travel Speed (cylinder speed)	1ft/min
Direction of Travel	2 way

Corrosion Protection

Located in Spud Cans/Legs:	Yes/No Yes, Aluminium / A11H
Located In Sea Chests Yes/No	Yes
Impressed Current System Installed:	No
Anti-Fouling System Fitted:	Yes

OPERATIONAL CAPABILITIES

Maximum design water depth capability:	300ft.(91.44mtrs)
Outfitted max/min water depth capability:	300/30ft.
Normal minimum water depth capability:	30ft.
Draft at load line (deepest):	16.7ft. (5.1mtrs)
Drilling depth capability (rated):	30,000ft.
Transit speed towed (historical avg.):	To be confirmed when historical data available.
Leg (spud can) below hull in wet transit):	0 feet
Maximum leg length permitted in tow:
Ocean tow:	409.6ft (124.83mtrs)
Field tow:	326.6ft. (106.16mtrs)
Number of tugs for field tow:	[see N.1]: 3
Associated minimum bollard pull per tug:	Per Marine Surveyors Requirement
Anti-roll system: Yes/No	No
Maximum preload reaction per leg:	13,201.33kips
Bearing pressure at maximum preload:	13,201.33kips
Thrusters:	N/A
Quantity:	N/A
Fixed/Azimuthing:	N/A
Total horsepower per thruster:	N/A

VARIABLE LOAD CAPACITY (V/L) / (Exclusive of drilling loads)

Transit VL capacity:	4,136kips(1,880t)
Drilling VL capacity:	6,784kips(3,080t)
Survival VL capacity:	5,978kips(2,720t)
Jacking VL capacity:	4,136kips(1,880t)

ENVIRONMENTAL LIMITS

Transit:	Field transit (leg fully retracted)
Max. wave height:	15.24mtrs (elevated storm)
Max. wave period:	13.5seconds
Max. wind velocity:	36.01 m/s
Max. current velocity:	1knot(surface)
Max. heave (single amplitude):	N/A
Max. pitch (single amplitude):	6 degrees single amplitude
Max. roll (single amplitude):	6 degrees single amplitude

Technical specifications

Working water depth:	300ft
Drilling:
Air gap (below bottom of main hull):	37ft
Max. wave height:	35ft
Max. wave period:	13.5sec
Max. wind velocity:	70knots
Max. current velocity:
-surface	1knot
-bottom	N/A
Spudcan corresponding penetration:	10ft
Spud can corresponding bearing pressure intensity:	10,684lbs/ft2
Corresponding cantilever beam load:	1,500kips at hook
Corresponding variable load	8,300kips
Survival:
Air gap (below bottom of main hull):	37ft
Max. wave height:	50ft
Max. wave period:	15.5sec
Max. wind velocity:	100knots
Max. current velocity:
-surface	1knot
-bottom	N/A
Spudcan corresponding penetration:	10ft
Spud can corresponding bearing pressure intensity:	10,684lbs/ft2
Corresponding cantilever beam load:	400 kips at hook
Corresponding variable load:	4,615 kips
Includes:	ABSApproved F&G’s Calculation Methodology

MOORING SYSTEM / Anchor Winches

Quantity:	4
Make/Model:	Nantong Liwei/SDC300
Type (electric/hydraulic/diesel):	Electric
Total HP per winch:	65hp
Rated pull:	33Short Tons
Control locations (local/remote/both):	Both

Anchor

Quantity:	4
Make/type:	Chongqing Marine/STS Offshore Anchor Type Stevshark
Weight:	3T each

Anchors Line

Quantity:	4
Make/type:	Juli Sling Co. /6x36SW + IWR
Construction:	Steel braid with steel core wire rope
Diameter:	42mm
Useful length (Nominal):	458m

Towing Gear

Closed Panama Chock Yes/No	Yes
Smit Bracket Yes/No	Yes
Towing bridle size:	8m*∮66m m steel chain
Hook-up system:	5Ton Air tugger winch
Rating:	MBL320T
Spare bridle:	N/A

Supply Vessel Mooring System Yes/No

Is Mooring System Installed: Yes/No	Yes
System description:	Bollard/Panama Chock
Rating:	MBL70T
Location (port/stbd./both):	Port/Starboard

Buoys

Quantity:	4
Make/type:	Yantai Elite M&E Equipment Co., Ltd.YTCB5000

MARINE LOADING HOSES

Location of loading manifolds (port/stbd./both):	Both

Potable Water Hoses

Quantity:	1
Size:	4”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Drilling Water Hose

Quantity:	1
Size:	4”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Diesel Oil Hose

Quantity:	1
Size:	4”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Mud Chemical Hoses

Quantity:	1
Size:	5”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Cement Hose

Quantity:	1
Size:	5”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Base Oil Hose

Quantity:	1
Size:	4”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Brine Hose

Quantity:	1
Size:	4”
Make/type:	Gates or Equiv.
Make/type connection:	Camlok

Other

Quantity:	N/A
Size:	N/A
Make/type:	N/A
Make/type connection:	N/A

CRANES, HOISTS, AND MATERIAL HANDLING / Cranes, Revolving

Quantity:	2
Specification (API, etc.):	API Spec. 2C Sixth Edition, Sept. 2004
Make:	MEPPellegrini Marine Equipment
Type:	GN 50/8 DH
Location (frwd/aft/port/stbd):	Port./ Stbd.
Boom length:	120ft/100ft
Hook reach below main deck using Main Block/Whip Line	To Water Level
Block capacities and hoisting speeds:
Load/radius/speed (minimum radius):	12ton/33m/20m/min.
Hook load indicator automatically corrected for boom angle:	Yes
Alarm (audible, visual, both):	Yes
Automatic brake:	Yes
Safety latch on hooks:	Yes
Crown saver (limit switch):	Yes
Boom llumination:	Yes
Hook eye system:	No

Forklift

Quantity:	1
Make/Model:	FB20-GD2P
Power Supply:	Battery / Electric
Rated capacity:	2T
Explosion proof: Yes/No	No

Monorail Overhead Cranes (Trolley & Chain Block)

Trolley
Make:	Daekyung Co. Ltd.
Rated capacity(kg) and quantity:	8,000x2sets
Rated capacity(kg) and quantity:	1,000x4sets
Location:	Engine room
Rated capacity(kg) and quantity:	8,000x2sets
Location:	Mud pump room
Chain block
Make:	Daekyung Co. Ltd
Rated capacity(kg) and quantity:	1,000x6sets \| 2,000x1sets \| 3,000x1sets \| 5,000x3sets
Location:	Sack storage room/pump room, etc.

Air Hoist/Derrick Winches / Rig Floor Winches (Non Man-riding)

Quantity:	2
Make:	JiangSu RuDong
Type:	QJ-5/air driven
Rated capacity:	5,000Kg
Wire diameter:	19mm
Automatic brake:	Yes
Overload protection:	No
Automatic spooling:	No/manual spooling

Monkey Board Work Winch

Quantity:	1
Make:	JiangSu RuDong
Type:	QJ-1/air driven
Rated capacity:	1,000kg
Wire diameter:	11mm
Automatic brake:	Yes
Overload protection:	No

Rig Floor “Man-Riding Winch”

Quantity:	1
Make:	Ingersoll Rand
Type:	LS2-150RLP-L-E
Rated capacity:	150kg
Wire diameter:	10mm
Non-twisted wire:	Yes
Automatic brake:	Yes
Overload protection:	Yes
Automatic spooling:	Yes
Certified for man-riding:	Yes

Utility Winch (i.e. Deck Winch)

Quantity:	4
Make:	JiangSu RuDong
Type:	QJ-5/air driven
Rated capacity:	5,000Kg
Wire diameter:	19mm
Automatic brake:	Yes
Overload protection:	No
Automatic spooling:	No
Locations:	Cellar deck

Technical specifications

Quantity:	1
Make:	Shin Myung
Type:	SMW-A5T8M-12P750
Rated capacity:	5,000kgs
Wire diameter:	19mm
Automatic brake:	No
Overload protection:	No
Automatic spooling:	No
Certified for man-riding:	No
Locations:	Under Helideck

Transfer Baskets/Containers / Personnel Transfer Baskets

Quantity:	1
Make/type:	Billy Pugh/X-871-6

Cargo Containers

Quantity:	Will be provide on location as request
Make/type:	20ft/DNV Certified

HELICOPTER LANDING DECK

Location (fwd./aft/port/stbd.):	Forward
Dimensions:	72'-10"x 72'-10"(22.20mtrs x22.20mtrs)
Perimeter safety net:	Yes
Deck Load capacity:	0.21 Tonne/m2
Maximum helicopter weight:	9.3ton per UK CAP437
Designed for helicopter type:	Sikorsky S61N Helicopter or equivalent
Tie down points:	Yes
Covered by foam fire system (see L.3.6):	Yes

Helicopter Refueling System

System make/type:	N/A
Fuel storage capacity:	N/A
Jettison able:
Fuel transport container, quantity:	N/A
Volume:
Fuel transport containers:	N/A
Volume:
Covered by foam fire system (see L.3.6):	N/A

AUXILIARY EQUIPMENT / Water Maker

Quantity:	2
Make/Model:	Aquachem Inc / HSRO-30
Type:	Reverse Osmosis
Capacity:	30T each unit
Rehardening Water Filter
Quantity:	2
Type/make:	FiL-1.5/ Hansun Marine Technology Co.Ltd.
Volume:	75L
Capacity:	1.5m3/h
UV- Sterilizer
Quantity:	2
Type/make:	Jowa UV 5/ Jowa AB
Capacity:	10m3/h

Boilers (Hot Water Heater)

Quantity:	2ea
Make:	JowaAB
Capacity (total system):	1,500ltrs

Air Conditioning

Make/type:	Josun/Yongsheng/MCW720
Capacity (total system):	720kW/each set
Max. temperature rating (Inlet):	7deg.
Max. temperature rating (Outlet):	12deg.

Electric Welding Sets

Quantity:	2ea
Current capacity:	400Amp-AC
Make/model:	Miller/XMT 304
Type (fixed/portable):	Fixed
Welding Inlet Station:
Qty:	2
Location:	Welding Workshop on Main Deck
Welding Outlet Station:
Qty:	10
Location:	Welding Workshop(qty:1)/Mechanical workshop(qty:1)/Main deck(qty:4)/Mud Pump RM (qty:1)/04 Deck(qty:1)/Cantilever(qty:1)/Engine RM(qty:1)

High Pressure Cleaner

Quantity:	3
Make/type:	C-200 US NILFISK DENSIN
Electric/pneumatic/diesel:	Electric
Max delivered pressure	200 bar
with steam:	No

DERRICK AND SUBSTRUCTURE / Derrick/Mast

Make/type:	TSC / Bolted Single Static Bottle Neck
Rated for wind speed
With full set back:	70 Knots
With No set back:	100 Knots
Height:	170ft
Dimensions of base:	35ft x 40ft
Dimensions of crown:	18ft x 18ft
Static hook load:	1,500,000lbs.
Maximum number of lines:	14
Ladders with safety cages and rests:	Yes
Platform for crown sheave access:	Yes
Counter balance system for rig tongs and pipe spinning tong:	Yes
Lightning system explosion proof:	Yes

Racking Platform / Drill Pipe Finger Board

Make/type:	TSC/ Integrated in Derrick
Total current simultaneous capacity - drill pipe: Up to 5-1/2” DP:	252 stands
Total current simultaneous capacity - drill pipe: 9-1/2” inch DC:	8 stands
Tubing belly board:	No

Automated Pipe Handling / Bridge Racker

Make:	TSC
Description:	The Bridge Racker is mounted in the derrick above the pipe stands. Its function is transporting of the drill string stands from the well centre to the setback / fingerboard – and vice versa

Catwalk Machine

Make:	TSC
Service:	Transportation of tubulars.
Tubular Range:	Range 2
Capacity:	20 short tons
Weight of Unit:	19.3 short tons
Support frame:	Approx. 25 short tons
Speed of operation:	45ft./min.

Stand Arm

Make:	TSC
Service:	Lifting stands(3 singles dp/dc):3½” drillpipe to 8-1/4” drillcollars.
Maximum length:	101’
Minimum length:	N/A
Capacity:	8 short tons
Travel length:	To suit maximum tubular
Travel speed:	0 – 100ft/min

Horizontal to Vertical Arm and Rails

Make:	TSC
Service:	3½” drillpipe to 8-1/4” drillcollars
Capacity:	3.0 short ton
Weight of Unit HTV arm / trolley:	7.8 short ton
Guiderails:	4.3 short
Winch:	1.3 short ton
Railspan:	5ft.
Lift speed:	0 – 90ft. / min
Hydraulic Supply:	250 l/min at 200bar

Casing Stabbing Basket

Make/type:	TSC/ CSB – 1000
SWL:	250kg
Adjustable:	Max outreach 10,700mm
Telescopic stroke:	5,000mm
Operating radius:	80degrees
Tilt angle:	Plus or minus 60˚
Safety Devices:	Rescue line in basket/emergency stop

Substructure

Make:	TSC
Drill floor height (above main deck):	16.575mtrs
Length:	22.15mtrs
Width:	14.81mtrs
Setback capacity:	950kips
Simultaneous setback + hook-load capacity:	2,600kips maximum
Clear height below rotary table beams (to main deck):	14.5mtrs

Weather Proofing

Rig floor windbreaks:	Yes
Derrickman windbreaks:	Yes
Around process pits:	Yes

Derrick TV Camera System

Camera located at:	Racking/finger board, one (1) Mud pump room, one (1) Drill floor under deck, one (1) BOP Deck(1)
Make/Type:	Changzhou Zuoan/ZAT600
Zoom/Pan/Tilt-function:	Yes (Camera in Mud pump room without Pan / Tilt)
Monitor located at:	Driller Console/Company man office/Toolpusher office

DRAWWORKS AND ASSOCIATED EQUIPMENT / Drawworks

Make/type:	Oilfield Electric Marine / 2330
Motors make/type:	Oilfield Electric Marine / 1,150hp AC Traction Motor
Quantity:	2 x 1,150hp
Continuous power:	2,300hp
Intermittent power:	3,000hp
Drum type (grooved/smooth):	Grooved
For drill line size:	1-5/8inch
Brake type (disk/drum):	Disk, AC regen. by AC Motors
Maximum line pull 14 lines:	1,200,000lbs
Makeup cathead type:	N/A
Breakout cathead type:	N/A
Crown block safety devices:	Yes (Crown saver and floor saver, anticollision system)
Independent Sea water cooling system for drawworks:	Yes
Automatic driller:	Yes
Make:	TSC

Auxiliary Brake

Make:	TSC
Model:	Eaton Brake

Sand line

Yes/No	No
Make:	N/A
Length capacity:	N/A
Line size/type:	N/A

DERRICK HOISTING EQUIPMENT / Crown Block

Make:	TSC
Rated capacity:	1,500,000lbs.
No. of sheaves:	7 Sheaves plus 2 Guide Sheaves .
Sheave diameter:	60inch
Sheave grooved for line size:	1-5/8inch

Traveling Block

Make/type:	Canrig / AY14522
Rated capacity:	1,500,000lbs
No. of sheaves:	7
Sheave diameter:	60inch
Sheave grooved for line size:	1-5/8inch

Hook

Make/type:	N/A
Rated capacity:	N/A
Complete with spring assembly/hook:	N/A
locking device:	N/A

NO / Drilling Line

Diameter:	1-5/8”
Construction:	IWRC
Type	6X26WS Grade EEIPS
Length (original):	10,000ft
Drilling line reel:	TSC/DRL-44-2280
Drum cover:	N/A
Drilling line drum power driven:	Yes
Spare drilling line:	No
Location (rig, shore, etc.):	N/A
Roller guides:	Yes

Dead Line Anchor

Make/type:	JPMC/ZJ60A
Weight sensor:	Yes
Deadline dampener:	N/A

ROTATING SYSTEM / Rotating Table

Make/type:	TSC / 495E
Maximum opening:	49-1/2 inch
Rated Capacity:	750 short tons
Two speed gearbox: Yes/No	Yes
Emergency chain drive:	No
Driven by an independent electric motor:	Yes
Electric motor make/type:	Oilfield Electric Marine / 1,150hp AC Traction Motor
Drip pan/mud collection system:	Yes

Master Bushings

Make/type:	Jiangsu Rudong Machinery Co./ MPCH
Insert bowls	(see G.1.8)
Adapter Ring:	OD49.5”, ID37.5”
Master Bushing:	1ea
Insert Bowl No.1 for 13-3/8” and 11-3/4” casing:	1ea
Insert Bowl No.2 for 10-3/4” and 9-5/8” casing:	1ea
Insert Bowl No.3 for 8-5/8” and 2-3/8” casing:	1ea
4 Hook Lifting slings for master bushing:	1ea
2 Hook Lifting slings for split casing bushing:	1ea
Casing bushing for 20” and 18-5/8” casing:	1ea
Casing bushing for 24” casing:	1ea
Casing bushing for 30” casing:	1ea

Kelly Bushing

Yes/No	Yes
Make/type:	RUSHI ROLLER KELLY BUSHING FOR 5 1/4" HEX. KELLY W/ KELLY WIPER FOR 37-1/2" ROTARY TABLEHDS (Heavy duty pin drive)ROLLER KELLY BUSHING FOR 3-1/2" HEX. KELLY W/ KELLY WIPER FOR 37-1/2" ROTARY TABLE
Quantity:	2

اطلاعات تماس

دفتر مرکزی: تهران، میدان ونک، خیابان گاندی، خیابان ۲۳، پلاک ۲۰

021-96880000

021-88874452

info@mapnadrilling.com

وب‌سایت: mapnadrilling.com